Detailed analysis on thermal,microstructural, mechanical,and morphological features of side chain liquid crystalline polymer/isotactic polypropylene graft copolymers: Effect of grafted and ungrafted polymer units

The main scope of this comprehensive study is to investigate the effects of poly(p-benzophenoneoxycarbonylphenyl acrylate), poly(BPOCPA), which presenting as only graft units or both graft and ungrafted units in the matrix, on the fundamental features of isotactic polypropylene (IPP). The graft copolymerization of BPOCPA onto IPP was performed with the aid of bulk melt polymerization at varying monomer content levels ranging from 5% to 40%. The thermal behavior, crystal quality, mechanical performance, and surface morphology of the samples were investigated by means of differential scanning calorimeter, X-ray diffractometer (XRD), universal mechanical test, and scanning electron microscope (SEM) techniques. Thermal analyses depicted that there existed the noteworthy enhancements in both crystalline melting temperatures and percent crystallinities of matrix polymers. Furthermore, according to XRD results, a and b parameters increased significantly at low percentages of the graft units, while the parameter c decreased in all products in consistence with the content. As for the mechanical characterization, the grafting led to remarkable improvements in modulus, tensile and impact strength of the products. SEM micrographs indicated that the samples were completely homogeneous without any phase separation and the products exhibited brittle nature with some ductility.     

分子筛负载有机磷酸酯成核体系对聚丙烯性能的影响研究

采用溶液浸渍法制备了不同分子筛负载有机磷酸酯（MBP）成核体系，研究其对等规聚丙烯（iPP）结晶性能和力学性能的影响，并通过扫描电子显微镜观察不同分子筛对MBP的分散情况，进而揭示不同分子筛负载MBP对iPP成核性能提升差异的原因。结果表明，B类分子筛?1和B类分子筛-2负载MBP对iPP性能影响有限。而A类分子筛-1和A类分子筛-2负载MBP成核体系对iPP的性能提升明显：不仅促使iPP的结晶温度分别提高了10 ℃和6 ℃；也在促使iPP的弯曲模量分别提高29.9 %和13.0 %的同时，使得其冲击强度分别提升8 %和7 %，起到了有效的刚韧平衡的作用。成核体系的SEM结果表明，A类分子筛-1的加入能有效分散MBP，从而促使其在iPP当中发挥成核性能；而B类分子筛?1本身团聚严重，无法很好地分散MBP，因此无法发挥提升iPP成核性能的作用。     

High-performance NdSrCo2O5+δ–Ce0.8Gd0.2O2-δ composite cathodes for electrolyte-supported microtubular solid oxide fuel cells

NdSrCo₂O_5+δ (NSCO) is a perovskite with an electrical conductivity of 1551.3 S cm⁻¹ at 500 °C and 921.7 S cm⁻¹ at 800 °C and has a metal-like temperature dependence. This perovskite is used as the cathode material for Ce_0.8Gd_0.2O_2-δ (GDC)-supported microtubular solid oxide fuel cells (MT-SOFCs). The MT-SOFCs fabricated in this study consist of a bilayer anode, comprising a NiO–GDC composite layer and a NiO layer, and a NSCO–GDC composite cathode. Three cell designs with different outer tube diameters, GDC thicknesses, and NSCO/GDC ratios are designed. The MT-SOFC with an outer tube diameter of 1.86 mm, an electrolyte thickness of 180 μm, and a 5NSCO–5GDC composite cathode presents the best performance. The flexural strength of the aforementioned cell is 177 MPa, which is sufficient to confer mechanical integrity to the cell. Moreover, the ohmic and polarization resistance values of the cell are 0.22 and 0.09 Ω cm² at 700 °C, respectively, and 0.15 and 0.03 Ω cm² at 800 °C, respectively. These results indicate that the NSCO-GDC composite exhibits high electrochemical activity. The maximum power densities of the cell at 700 and 800 °C are 0.46 and 0.67 W cm⁻², respectively, exceeding those of existing electrolyte-supported MT-SOFCs with similar electrolyte thicknesses.     

Preparation and Characterization of Hydrophobic Bagasse Hemicellulose-based Films

To improve the hydrophobicity of bagasse hemicellulose-based films, glutaraldehyde was applied when preparing films of original and cationic bagasse hemicellulose with the addition of polyvinyl alcohol and sorbitol. The results showed that the cationic modification could increase the hydrophobicity of the hemicellulose-based film, and the hydrophobicity of hemicellulose-based films crosslinked with glutaraldehyde also increased. However, cationic modification of hemicellulose decreased the stress of the hemicellulose-based film. While crosslinking with glutaraldehyde increased the stress of both the original and cationic hemicellulose-based films. Macrophotography indicated that the film formability of the original hemicellulose was better than that of cationic hemicellulose. Through SEM observation, the degree of bonding of different components of the films was found to be increased due to crosslinking with glutaraldehyde. The crosslinking reaction between glutaraldehyde and hemicellulose was further confirmed by FT-IR spectroscopy.     

掺合料对超高性能水泥基装饰材料性能的影响

将重钙粉与偏高岭土以不同的比例混合并替代白水泥，制备超高性能水泥基装饰材料,研究两者掺入比例变化对超高性能水泥基装饰材料工作性能、力学性能及自收缩的影响，采用SEM扫描电镜观察28 d龄期后试件内部微观形貌，研究表明，随着重钙粉与偏高岭土比例的增大，试件的致密程度和强度先增后减，其中B9-9的28 d抗压与抗折强度可以达到120.6 MPa与42.9 MPa，且工作性、收缩性能良好、内部结构致密。     

基于比累对切透镜的联合菲涅耳变换相关器特性研究

相关器的特性变化规律对其实际应用中参数的设定具有重要的指导意义。针对基于比累对切透镜的联合菲涅耳变换相关器,通过数值仿真详细分析了比累对切透镜缝宽变化对相关器输出特性和空变特性的影响。结果表明,比累对切透镜缝宽能一定程度地控制联合菲涅耳变换功率分布的有效面积、相关峰的尖锐度及其空变特性的敏感度。实验采用纯相位空间光调制器编码比累对切透镜相位掩模替代实体透镜的方式搭建了相关器,实验结果与仿真结果一致性好,进一步验证了上述结论的正确性。     

Modular Self‐Assembling Peptide Platform with a Tunable Thermoresponsiveness via a Single Amino Acid Substitution

The introduction of a stimulus‐responsive property is an effective way to increase the applicability of functional materials in the field of nanobiotechnology. Herein, a peptide platform is devised for constructing elastin‐like peptide amphiphiles (ELPAs) that exhibit a temperature‐responsiveness that can be easily tuned via a single N‐terminal amino acid substitution at the final step of peptide synthesis. Due to the modular property of peptides, the platform based on a miniaturized elastin‐like peptide (MELP) can be conjugated with various bioactive peptide sequences in diverse macromolecular topologies. First, the MELP platform is coupled with a short linear RGD peptide. The ELPAs of the peptide conjugates exhibit rapid aggregation (coacervation) and retard disaggregation in response to heating and cooling, respectively. Second, the platform is grafted with an α‐helical guest peptide in a lariat‐type structure, which forms ELPAs that undergo faster disassembly than the ELPAs without the guest peptide in response to temperature increases. Interestingly, the critical temperatures for the thermoresponsive behaviors are commonly dependent on the hydrophobic and aromatic properties of the N‐terminal amino acid residues. These results suggest that this peptide platform possesses great potential for use in the development of smart materials in wide‐ranging applications related to temperature change.     

聚乙烯醇/改性纳米蒙脱土复合材料的制备与性能

纳米蒙脱土(MMT)用十六烷基三甲基溴化铵进行改性制得有机改性的MMT(OMMT),用其作为聚乙烯醇(PVAL)的改性材料,采用溶液共混、流涎成膜制得PLA/OMMT复合材料,考察了OMMT的用量对PVAL复合材料性能的影响。用傅立叶变换红外光谱(FTIR)仪、差示扫描量热仪、扫描电子显微镜、X射线衍射仪、万能力学试验机等对复合材料性能及结构进行表征和分析。结果表明,FTIR显示十六烷基三甲基溴化铵成功进入MMT结构中,OMMT成功制得;随着OMMT添加量的增加,复合材料热稳定性提高,断裂伸长率降低,拉伸强度呈现先增加后降低趋势,当其含量为9%时达到最大;SEM显示OMMT含量9%时,OMMT与PVAL相容性最好,表面光滑,含量再增加,出现团聚现象,力学性能受到影响。     

氧化铈-二氧化硅介孔材料制备及对铜离子的吸附性能

采用共沉淀法和沉淀浸渍法制备了纳米氧化铈-二氧化硅（CeO₂-SiO₂）介孔材料吸附剂,主要考察了其对水中铜离子（Cu²⁺）的吸附行为。通过X射线衍射（XRD）、扫描电镜（SEM）和氮吸附（BET）等手段对合成的介孔材料进行了性能表征,并通过静态吸附实验分析了溶液pH、溶液初始金属离子质量浓度、吸附剂用量、吸附时间等条件对介孔材料吸附Cu²⁺性能的影响。结果表明：共沉淀法制备的纳米CeO₂-SiO₂介孔材料对Cu²⁺的去除效果较沉淀浸渍法要好;当溶液pH=7.0时CeO₂-SiO₂介孔材料对Cu²⁺的吸附效果最好,20 min时基本达到吸附平衡;溶液初始Cu²⁺浓度增大Cu²⁺去除率降低,Cu²⁺累计吸附量增大;随着吸附剂用量增加Cu²⁺去除率增大,当CeO₂-SiO₂吸附剂用量为0.15 g/L时对Cu²⁺的去除率趋于稳定;CeO₂-SiO₂吸附剂对不同金属离子吸附性能由大到小的顺序为Cu²⁺、Fe²⁺、Mn²⁺,该吸附过程均符合准二级动力学模型。     

The influence of processing conditions on the mechanical properties of poly(aryl-ether-ketone)/polybenzimidazole blends

Interest in developing high-performance blends for niche applications has grown significantly in efforts to meet ever-increasing harsh environment demands. In this work, four model poly(aryl-ether-ketone)/polybenzimidazole (PAEK/PBI) blends were chosen to study the influence of premixing methods, processing, and matrix polymers, on their mechanical properties. Among the model poly(ether ether ketone) (PEEK) and PBI blends, mechanical properties are greatly enhanced by melt premixing. The molding process mainly affects the matrix crystallinity, which in turn greatly influences fracture toughness of the blend. Poly(ether ketone ketone) (PEKK) and PBI blend exhibits a slightly lower tensile strength and fracture toughness than PEEK/PBI due to the differences in inherent properties of PEEK and PEKK matrices and their interfacial interaction with PBI. The processing−structure–property relationship of PAEK/PBI blends is established to help guide optimal design of high-performance polymer blends for structural applications. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48966.